This page can be used to generate the Teensy GPS data logging configuration file. The Input/Control Parameters are inputs used to setup various features on the Teensy GPS data logger. The GPS message and 9DOF sensor sections are output parameters that will be logged to the MicroSD card or transmitted on the CAN bus. All of the data will be written to the log in a single line or message. Once everything is set, press the "Generate Config File" button and you will be prompted to download your config.jsn (JSON) file. Read This!

Input / Control Parameters

Event Trigger (Data Logging Type = 1)

Interval Trigger (Data Logging Type = 2)

       Enable            CAN Bus ID (decimal)

GPS Message

9DOF Sensor